Description |
High Corrosion resin, excellent for corrosion applications; specially developed to exceed in marine and pool applications. |
High Corrosion Resistance Vinyl Ester for use in the manufacture of Chemical Process Equipment. |
MFE 711-200 is a low viscosity version of MFE-711. This vinyl ester resin is principally designed for RTM & Vacuum Infusion Processes. |
MFE-722 is a cost effective vinyl ester resin technology that delivers excellent corrosion resistance, high temperature resistance, good wettability and processability, whilst utilising standard catalyst system. |
Technical Data Sheet |
|
|
|
|
Safety Data Sheet |
|
|
|
|
Application |
Suitable for sprayup, hand lamination and filament winding |
Suitable for sprayup, hand lamination, filament winding, compression molding & pultrusion |
Suitable for infusion, RTM, Compression molding |
Suitable for sprayup, hand lamination, filament winding, compression molding & pultrusion |
Benefits |
MFE-11 is Lloyds approved and is subsequently well received in the marine industry. It is also an excellent resin for chemical tanks, swimming pool skin layers, pipes and corrosive environments. MFE-11 is available unwaxed, waxed and XLE and across various gel times. |
Easy workability with good air drying, whilst enabling shorter gel-to-cure intervals, thus reducing internal stress cracking, The resin’s improved reactivity properties permit an increase in the lay-up thickness per session. Higher elongation provides FRP equipment with increased toughness. When properly formulated and cured, it complies with FDA regulation 21 CFR 177.2420, covering materials intended for repeated use in contact with food. Longer shelf life provides additional flexibility to fabricators in storage and handling. |
Lower viscosity version of MFE-711, providing excellent mechanical properties and chemical resistance as for MFE-711. Effectively wet out with glass fiber. Excellent corrosion resistance, especially to alkali. Low shrinkage and superior toughness. Suitable for thick composite parts. |
Excellent and acid, alkali and solvent resistance. High heat distortion temperature (HDT) of pure resin casting is 130℃. Used for various types of anti-corrosive FRP products, such as storage tank, fume stacks and pipeline, to name a few. |
Chemical Structure |
VE |
VE |
VE |
VE |
Tensile Strength MPa |
80-95 |
80-95 |
75-95 |
70-80 |
Tensile Modulus GPa |
3.2 -3.7 |
3.2-3.6 |
3.2-3.7 |
3.0-3.4 |
Flexural Strength MPa |
120 -150 |
120-150 |
120-150 |
130-140 |
Flexural Modulus GPa |
3.3 - 3.8 |
3.3 |
3.2-3.8 |
3.2-3.5 |
Elongation % |
5.0-6.0 |
5.0-6.0 |
5.0% - 6.0% |
3.0-4.0 |
HDT °C |
105°C |
|
105°C |
130°C |
Acid Value |
7-13 |
7-13 |
7-13 |
6-14 |
Appearance |
Clear, Light Yellow |
Clear, Light Green |
Clear, Light Green |
Light Green |
Viscosity cps@25C |
400-650 |
250-450 |
150-250 |
300-400 |
Styrene Content |
37-45% |
42-48% |
42-48% |
41-47% |
Certificates |
Lloyds |
Lloyds |
Lloyds |
- |
Suface Finish Options |
Unwaxed, Waxed & XLE |
Unwaxed, Waxed & XLE |
Unwaxed, Waxed & XLE |
Unwaxed, Waxed & XLE |
Thixotropic Avail. |
Yes |
Yes |
N/A |
Yes |
Promoted To Req. Geltime |
Yes |
Yes |
Yes |
Yes |
Packaging |
1,000 litre Schutz, 200 litre Drum, 20 litre Pail |
1,000 litre Schutz, 200 litre Drum, 20 litre Pail |
1,000 litre Schutz, 200 litre Drum, 20 litre Pail |
1,000 litre Schutz, 200 litre Drum, 20 litre Pail |
Storage |
Do not leave in direct sunlight or at temperatures greater than 30C. Reseal lid after use. 3 Months shelf life from manufacture date; as per RF Label. |
Do not leave in direct sunlight or at temperatures greater than 30C. Reseal lid after use. 3 Months shelf life from manufacture date; as per RF Label. |
Do not leave in direct sunlight or at temperatures greater than 30C. Reseal lid after use. 3 Months shelf life from manufacture date; as per RF Label. |
Do not leave in direct sunlight or at temperatures greater than 30C. Reseal lid after use. 3 Months shelf life from manufacture date; as per RF Label. |